#Motu 828 manual install#
#Motu 828 manual manual#

#Motu 828 manual install#

Heat - Do not install the 828mk3 near any heat sources such as radiators, heat registers, stoves, or another apparatus (including an amplifier) that produces heat.Д©.

Install in accordance with the manufacturerвЂ™s instructions.ДЁ. Ventilation - Do not block any ventilation openings. Cleaning - Unplug the 828mk3 from the computer and clean only with a dry cloth. All operating and use instructions should be followed.Д¦.

#Motu 828 manual manual#

All warnings on the 828mk3 and in the ownerвЂ™s manual should be adhered to.Д¤. These safety instructions and the 828mk3 ownerвЂ™s manual should be retained for future reference.ДЈ. All the safety and operating instructions should be read before operating the 828mk3.Дў. Use only three wire extension cords which have three-prong grounding type plugs and three-prong receptacles whichДЎ. Adapter is not allowed in Canada by the Canadian Electrical Code. NOTE: The adapter illustrated is for use only if you already have a properly grounded two-prong If you are not sure that your outlet box is properly grounded, have it checked by a qualified electrician. NOT ALL OUTLET BOXES ARE PROPERLY GROUNDED. WARNING: THE GREEN GROUNDING LUG EXTENDING FROM THE ADAPTER MUST BE CONNECTED TO A PERMANENT GROUND SUCH AS TO A An adapter as illustrated below in Figure B is available for connecting plugs to two-prong receptacles. It is recommended that you have a qualifiedД®lectrician replace the TWO prong outlet with a properly grounded THREE prong outlet. Use an adapter as shown below and always connect the grounding lug to a known ground. OR ALTER THE GROUNDING PRONG IN ANY MANNER. If the outlet you are planning to use for the MOTU 828mk3 is of the two prong type, DO NOT REMOVE This plug requires a mating three-conductor grounded type outlet as shown in Figure A below.

The MOTU 828mk3 is equipped with a three-conductor cord and grounding type plug which has a grounding prong, approved by Underwriters' Laboratories and the Canadian Standards Association. WARNING: IF NOT PROPERLY GROUNDED THE MOTU 828mk3 COULD CAUSE AN ELECTRICAL SHOCK. WARNING: DO NOT PERMIT FINGERS TO TOUCH THE TERMINALS OF PLUGS WHEN INSTALLING OR REMOVING THE PLUG TO OR FROM THE OUTLET. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR OTHER MOISTURE.Д¬AUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER. HAZARDOUS VOLAGES: CONTACT MAY CAUSE ELECTRIC SHOCK OR BURN. FAILURE TO COMPLY WITH SAFETY INSTRUCTIONSД¬OULD RESULT IN BODILY INJURY OR EQUIPMENT DAMAGE. SAFETY PRECAUTIONS AND ELECTRICAL REQUIREMENTSД¬AUTION! READ THIS SAFETY GUIDE BEFORE YOU BEGIN INSTALLATION OR OPERATION.